Introduction
I think most of you use 2 remotes for running your TV one is your TV remote and the other is the airtel DTH remote. One for your Television and the other to run your DTH. It’s difficult to operate television if any one of the remote is missing. Isn’t it?
It would be much better if we can use one remote to operate both Television and the DTH. You can use your Airtel DTH remote as a default TV remote. This can be done in a few simple steps.
Training your Airtel remote
To make this possible, you have to train your airtel remote to work on both the DTH and the television. In simple words, you should train your AIRTEL remote to do 3 important functions. They are
- Switch on / Off your Television
- Volume control options
- AV mode operation
Switch on / OFF
You should train the airtel DTH remote so that you can use the same to switch on and off the television using the DTH remote.
Volume control options
You have to train the DTH remote to increase, or decrease or mute the volume of the television.
AV mode options
As DTH works through AV input or HDMI input, you should train your Airtel DTH remote to change the input options of your TV accordingly.
5 steps to pair AIRTEL remote to your television
Take your /airtel Remote. Press the “OK” button + “Num 2” button at the same time for 3 seconds. The LED light in front of the remote blinks twice indicating that the remote has entered LEARNING MODE.
Now keep the Airtel remote and our ordinary TV remote opposite one another / facing each other. “> <“
Now press the power key on the Airtel remote and do the same on the TV remote also. Now your airtel remote understands the IR frequency of your TV power option. Continue to hold the remotes against one another.
Repeat the same process for Volume up, Volume down, and mute buttons also. In simple words, first these buttons one by one on your Airtel remote followed by your ordinary TV remote.
Repeat the same process for the AV option also. Click the AV button on your airtel remote followed by your ordinary remote. AFTER COMPLETING THE PROCESS, PRESS OK BUTTON ON YOUR AIRTEL REMOTE.
Now your airtel remote has learned all the IR signal frequencies of your TV. Now your AIRTEL remote is ready to operate both TV and DTH box at the same time.
But remember! if the airtel remote blinks 4 times or is not responding during the learning phase, it is an indication that the learning phase has failed.
NO NEED OF USING 2 REMOTES ANYMORE. FOLLOW THESE 5 SIMPLE STEPS AND OPERATE BOTH TV AND DTH WITH THE SAME REMOTE.
Thanks for telling me.