Introduction
Sharp is a well-known product in the field of Microwave. Since 1962, sharp microwave has sold more than 130 million microwaves around the world.
It is one of the few trusted brands in the USA. Being a compact machine, it fits your space and powers your needs uplifting your kitchen environment.
With a wide range of products and sizable wattages, Sharp microwave ovens fit your needs.
Error codes
There are a variety of error codes displayed in the Sharp oven. Here is the list of error codes and their solutions.
EE0 Error codes in Sharp microwave
This error code usually appears if there is a circuit problem in the internal wiring. Usually, the display and the heating stops here.
EE1, EE2, EE3 error codes in Sharp microwave
This occurs due to the failure of circuit 1. The possible damage could be to Magnetron, Power transformer, Capacitator, HV rectifier, or to the secondary interlock switch.
It may also occur if damage occurs to the magnetron temperature fuse or any damage to the control unit.
You should call the customer care to rectify the problem.
EE4 error code
This error code usually arises due to high voltage input, which causes damage to the control unit. In such a case switch off the machine and unplug it. Call customer care.
EE5 error code in Sharp microwave
It usually arises due to too low voltage. In such conditions, switch off the machine and unplug it. Wait for the voltage to rectify. Once the voltage is rectified, then the machine is back to use.
EE7 error code
The code is displayed when the food is completely burnt due to high temperatures.
EE11, EE21,EE31 error codes
These codes are related to the magnetron within the machine. They represent of signal that the life of magnetron has ended.
To replace the magnetron, call customer care.
EE14, EE24 error codes in Sharp microwave
These error codes are related to the cooling fan. Usually, they are displayed when the cooling fan is locked or mal-functional.
EE44, EE54 error codes
They represent a fault in the exhaust motor or the motor might have damaged completely which requires replacement.
EE15, EE25, EE35 error codes
They are related to antenna rotation errors and require customer care support to rectify it.
EE17, EE27 error codes in Sharp microwave
These error codes are related to extreme temperatures in the oven due to faulty magnetron.
EE19, EE39 error codes
These codes represent too little food or no food in the oven.
Also read about
